Chronoswiss has built much of its modern identity around the regulator display, but the Open Gear ReSec gave that classical layout a sharper, more architectural personality.
Now the collection is being closed out with the Chronoswiss ReSec Final Edition, a 100-piece limited run that keeps the model’s exposed mechanics while dialing back the colour drama for a cooler, more industrial finish.
It’s a deliberate farewell rather than a reinvention, and that makes it one of the more focused ReSec executions in recent memory.

At a glance
- Chronoswiss is concluding the modern Open Gear ReSec line with a 100-piece Final Edition.
- The watch pairs a 42mm Grade 5 titanium case with a hand-guilloché rose gold CVD dial and exposed grey CVD-treated architecture.
- It uses the automatic Calibre C.6005 made with La Joux-Perret and is priced at CHF 14,400 or EUR 15,800.
A regulator layout with modern depth
The Open Gear ReSec arrived in 2018 as Chronoswiss’s more contemporary take on the regulator, a format that separates the indications rather than presenting time through a conventional central hour-and-minute layout.
Here, the minutes remain central, the hours sit off-centre at 12 o’clock, and the retrograde seconds occupy the lower half of the dial.
That arrangement became more than a display choice for Chronoswiss.

With exposed bridges, a suspended hours ring and visible dial-side construction, the ReSec turned the regulator into something closer to a mechanical stage set.
The Final Edition keeps that stacked architecture intact, which is important because the model’s appeal has always been tied to depth as much as to complication.
Titanium, guilloché and a quieter palette
The case is made from Grade 5 titanium and measures 42mm across, with a thickness of 14.2mm and a lug-to-lug span of 51mm.

Chronoswiss describes it as a 17-part construction, and the familiar signatures remain, including the polished, partially knurled bezel and the onion crown.
A curved sapphire crystal with double-sided anti-reflective coating sits over the dial, while the screw-down caseback has its own sapphire window.
Water resistance is rated to 100 metres.

The dial is the more telling part of this final version.
Chronoswiss has used a hand-guilloché turbine pattern for the main dial surface, finished with a warm rose gold CVD coating that gives the watch a muted metallic glow rather than a brightly precious look.
Around it, the exposed bridges, minute track and retrograde seconds assembly are sandblasted and treated with a light grey CVD coating.

The result is a beige-and-grey composition that feels more controlled than some of the ReSec’s more colourful editions.
Light Old Radium ceramic markers and lume-filled Dauphine-style hands complete the display, adding a vintage-toned accent without pushing the watch into nostalgia.
Calibre C.6005 and the final ReSec specification
Inside is the automatic Chronoswiss Calibre C.6005, made with La Joux-Perret.

The movement measures 33mm in diameter, uses 31 jewels and runs at 28,800 vibrations per hour.
Power reserve is 55 hours, which places it comfortably beyond a conventional two-day autonomy.
Through the caseback, the movement shows a skeletonised tungsten rotor mounted on ball bearings, along with a ruthenium-plated bridge decorated with Geneva stripes.

The escapement components and screws are polished, keeping the mechanical finishing in line with the watch’s visible, openworked character.
Details & Specifications
| Brand | Chronoswiss |
|---|---|
| Model | ReSec Final Edition |
| Case size | 42mm diameter, 14.2mm thick, 51mm lug-to-lug |
| Case material | Grade 5 titanium |
| Case construction | 17-part case with polished, partially knurled bezel |
| Crystal | Curved sapphire with double-sided anti-reflective coating |
| Caseback | Screw-down caseback with sapphire window |
| Water resistance | 100 metres |
| Dial | Hand-guilloché turbine pattern with rose gold CVD coating |
| Display | Central minutes, off-centre hours at 12 o’clock, retrograde seconds at 6 o’clock |
| Markers and hands | Light Old Radium ceramic markers and lume-filled Dauphine-style hands |
| Movement | Automatic Chronoswiss Calibre C.6005, made with La Joux-Perret |
| Movement diameter | 33mm |
| Jewels | 31 |
| Frequency | 28,800 vibrations per hour |
| Power reserve | 55 hours |
| Rotor | Skeletonised tungsten rotor mounted on ball bearings |
| Strap | Cool grey rubber strap |
| Clasp | Folding clasp |
| Limited edition | 100 pieces |
| Price | CHF 14,400 or EUR 15,800 |
Worn on a cool grey rubber strap with a folding clasp, the ReSec Final Edition feels aimed at collectors who like Chronoswiss for its independent streak and visible mechanics rather than for understatement alone.
As a closing chapter, it doesn’t try to disguise what the ReSec has been since 2018, but it does give the watch a more restrained send-off with enough craft, texture and technical presence to mark the end properly.




