The C8 Corvette’s move to a mid-engine layout brought huge performance gains, but it also ended the model’s long-running relationship with a factory manual gearbox.
For owners who still want three pedals, Peitz Performance Tunes in Texas is preparing a manual conversion package that aims to bring a six-speed transaxle to Chevrolet’s current-generation Corvette.
Alex Peitz, owner of Peitz Performance Tunes, says the transmissions are expected to enter production and become available around July 2027, with pre-orders now being accepted.

At a glance
- Peitz Performance Tunes is taking pre-orders for a C8 Corvette manual transmission conversion expected around July 2027.
- The $75,000 package centers on a Tremec TR-9060 six-speed transaxle with new clutch hardware and MoTeC electronics.
- Customers must supply their own C8 Corvette, which originally uses a Tremec eight-speed dual-clutch automatic.
A three-pedal answer for the mid-engine Corvette
The C8 Corvette has never been offered from the factory with a manual transmission, relying instead on an eight-speed dual-clutch automatic supplied by Tremec.
That decision made sense for shift speed and modern performance targets, but it left a gap for drivers who see a clutch pedal as part of the Corvette experience.
Peitz Performance Tunes is positioning its conversion as a comprehensive swap rather than a single-component retrofit.

The package is built around a Tremec TR-9060 six-speed transaxle, paired with a new flywheel and clutch, a concentric slave cylinder and a modified clutch pedal sourced from the Cadillac CT4-V Blackwing.
Electronics are part of the hard work
A modern Corvette transmission swap isn’t just a mechanical exercise, and the electronics package is one of the more important details here.
The conversion includes MoTeC hardware, specifically an M182 plug-and-play ECU controller and an M150 transmission control unit, along with the required wiring and hardware.
That matters because the C8’s factory systems were engineered around a dual-clutch automatic, so a manual conversion has to integrate cleanly with the car’s electronic architecture.
Peitz says the manual transmission setup is claimed to handle up to 1,000 lb-ft of torque.
Price, timing and what owners need to provide
The package price is listed at $75,000.
That figure covers the conversion components, but it doesn’t include the donor car, so customers will need to provide their own C8 Corvette.
Production and availability are expected around July 2027, according to Alex Peitz, and pre-orders are now open.
For C8 owners who miss the involvement of a manual gearbox, the appeal is obvious, though the cost places this firmly in enthusiast-specialist territory rather than casual modification.
Details & Specifications
| Label | Value |
|---|---|
| Shop | Peitz Performance Tunes |
| Base vehicle | C8 Corvette supplied by customer |
| Conversion | Six-speed manual transaxle swap |
| Transaxle | Tremec TR-9060 six-speed |
| Clutch hardware | New flywheel and clutch |
| Slave cylinder | Concentric slave cylinder |
| Pedal | Modified clutch pedal from Cadillac CT4-V Blackwing |
| Electronics | MoTeC M182 plug-and-play ECU controller and M150 transmission control unit |
| Claimed torque capacity | Up to 1,000 lb-ft |
| Package price | $75,000 |
| Expected availability | Around July 2027 |
| Pre-orders | Now being accepted |
| Factory C8 transmission | Tremec eight-speed dual-clutch automatic |
If it reaches customers as described, this conversion could become one of the more intriguing aftermarket solutions for the mid-engine Corvette, not because it chases a headline number, but because it restores a kind of driver involvement Chevrolet no longer sells from the factory.




